Charge Air Regulation Vacuum Diaphragm

Charge Air Regulation Vacuum Diaphragm

Special tools, testers and auxiliary items required

• Torque wrench 5-50 Nm (VAG 1331)

Removing

- Remove the turbocharger. Refer to --> [ Turbocharger ] Turbocharger.

- Remove the circlip - arrow - from the vacuum diaphragm linkage.





- Disconnect the vacuum line - 2 - on the vacuum diaphragm - 1 -.





- Remove the vacuum diaphragm - 1 - from the turbocharger - arrows -.

Installing

• Tightening specification, refer to --> [ Turbocharger Charge Air Regulation Vacuum Diaphragm Assembly Overview ] Turbocharger Charge Air Regulation Vacuum Diaphragm Assembly Overview.

Install in reverse order of removal.