Rear Window Wiper Arm

Rear Window Wiper Arm

Removing

- Switch rear window wiper on and off again with ignition on in order to drive wiper arm into the end position.

- Flip up cover - 1 - on rear window wiper and unclip.

- Loosen nut - arrow -, without completely removing.





• Aero wiper blades are very flexible. Grasp wiper blade only in area of wiper blade mount to lift them off rear window.

- Fold up wiper arm and remove from cone moving it sideways.

- Remove the nut - arrow - and remove wiper arm.

Installing

- To bring the Rear Window Wiper Motor (V12) into the end position, switch the rear window wiper on and off again while the ignition is switched on.

- Insert wiper arm on wiper arm shaft at approximate rest position and hand-tighten nut - arrow -.





- Set rest position of rear window wiper. Refer to --> [ Rear Window Wiper Blade Park Position, Adjusting ] Rear Window Wiper Blade Park Position, Adjusting.