Windshield and Headlamp Washer Fluid Reservoir Filler Tube

Windshield and Headlamp Washer Fluid Reservoir Filler Tube

Removing

- Disconnect connecting tube - 1 - from filler tube - 3 - of tank for windshield washer system and headlamp washer system.





- Remove bolt - 2 -.

- Unclip hose retainer from filler tube - 3 - and remove it from vehicle.

Installing

Install in reverse order of removal, noting the following:

The casting mark on the bottom side of the filler tube must be inserted into the hole - arrow -.





Connecting tube - 1 - and filler tube - 2 - must be joined so that the guides - arrows - engage in each other.