Intermediate Shaft, Drive Axle with CV Joint VL107

Intermediate Shaft, Drive Axle with CV Joint VL107

Special tools, testers and auxiliary items required

• Thrust plate (VW 401)

• Thrust plate (VW 402)

• Thrust piece (T10032)

• Press support (3118)

• Kukko separating tool 22-115 mm (15-2)

Pressing Off the Bearing





- Press the bearing off of the intermediate shaft as shown in the illustration.

The jaws of the (15-2) must face toward the shaft.

1 - Intermediate shaft with bearing

2 - (VW 402)

3 - (VW 401)

4 - (15-2)

• When pressing off, hold the shaft tightly.

Pressing On the Bearing





- Press the bearing onto the intermediate shaft until seated as shown in the illustration.

1. (T10032)

2. Intermediate shaft

3. Bearing

4. (3118)

5. (VW 401)

6. (15-2)

7. (VW 402)

The recess - arrow - of the (3118) must face toward the bearing.