Clean Working Conditions

Clean Working Conditions

When working on the charge air system and turbocharger, always follow the rules below to ensure clean working conditions.

• Thoroughly clean all connections and the surrounding area before disconnecting.

• Place parts that have been removed on a clean surface and cover them. Use lint-free cloths.

• Carefully cover over opened components or seal, if repairs are not performed immediately.

• Only install clean components: Only unpack replacement parts immediately prior to installation. Do not use parts that have been stored loose (e.g. in tool boxes etc.).

• Transport and protective packaging and sealing caps are to be removed only immediately prior to installation.

• During repairs, clean oil from connections and hose ends.

• When the system is open: Avoid working with compressed air if possible. Do not move vehicle unless absolutely necessary.