Climatic Heating and A/C Controls

Climatic Heating and A/C Controls

Removing

CAUTION!
• Switch off all electrical consumers.

• Switch ignition off and remove ignition key.

• Heating and A/C controls consist of two separable housings. Before removing controls, set rotary control knobs to the following positions:

• Heater control to "cold"

• Blower control to "0"

• Air flow control to "footwell"

- Remove radio

- Remove long screws - 2 - and short screws - 3 - and remove controls - 1 - from center console.





- Disengage electrical connection retainer - A - by pulling in direction of - arrow 1 -.





- Disengage electrical connection retainer - B - to connector - arrow 2 - and disconnect electrical connection - C -.

- Disengage electrical connection retainer - D - and disconnect electrical connection - D -.

Installing

Install in reverse order of removal, ensuring rotary control knobs have not been moved from the positions as specified for removal.