Joint-Free Wiper Blades

Joint-Free Wiper Blades

• Right and left wiper blades may not be interchanged during installation.

• Joint-free wiper blades are very flexible. Grasp wiper blades only in area of wiper blade mount to lift them off the windshield.

• To remove wiper blades, wiper arms must be driven into "service/winter position". The "service/winter position" is activated by operating windshield wiper lever in "one-touch wiping" position within 10 seconds after switching off ignition.

Removal

- Move wiper arms into "service/winter position" by moving windshield wiper lever into "one-touch wiping" position within 10 seconds after switching off ignition.

- Fold the wiper arm up.

- Tilt the wiper blade - 1 - on wiper arm all the way - arrow A -.






- Remove the wiper blade - 1 - from the wiper arm axle - arrow B -.

Installation

- Push the wiper blade onto the wiper arm axle.

- Turn the wiper blade all the way on the wiper arm axle.

- Carefully fold the wiper arm back onto the windshield.