Oil Cooler: Service and Repair

Oil Cooler

Special tools, testers and auxiliary items required

• Drip Tray for VAS 6100 (VAS 6208)

Removing


Risk of scalding due to hot steam and hot coolant.

• When the engine is warm the cooling system is under pressure.

• Reduce pressure by covering the coolant expansion tank cap with a cloth and carefully opening.

- Drain the coolant. Refer to => [ Draining and Filling ] Procedures.

- Remove the accessory bracket. Refer to => [ Accessory Bracket ] Service and Repair.

- Remove the bolts - 4 and 5 - and remove the oil cooler - 3 - together with the seal - 2 -.





Installing

Installation is performed in the reverse order of removal, noting the following:

• Tightening specifications, refer to => [ Oil Filter, Cooler and Pressure Switch Overview ] Service and Repair.

• Always replace gaskets and seals.

• Secure all hose connections with hose clamps appropriate for the model. Refer to the Parts Catalog.

- Install the oil cooler - 3 - with a new seal - 2 -.