Fan Shroud

Fan Shroud

Removing

- Remove the bolts - 1 - from the top.





• The left bolt is under the coolant connector.

- Remove the noise insulation.

- Remove the charge air hose clamps - items 1 and 2 - and hose and seal the charge air cooler with a clean cloth.





- Disconnect the connector - 2 -.





- Remove the bolts - 3 - and remove the fan shroud downward.

Installing

Installation is performed in reverse order of removal, noting the following:

• Install the fan shroud from below.

• Tightening specifications, refer to => [ Radiator, Fan Shroud and Fans Overview ] Removal and Replacement.