Front Bumper Cover, GTI

Front Bumper Cover, GTI

• Removal and installation may be slightly different depending on the engine installed in the vehicle.

Removing





- Remove radiator grille: => [ Radiator Grille, GTI ] Radiator Grille, GTI

- Remove the bolts - 5 -.

- Remove bolts - 4 - from below.

- Unscrew bolts - 3 - and - 2 - (pointing upward) in area of left and right wheel housing liners.

A second technician is required for the rest of the removal procedure.

- With a second technician, pull cover - 1 - parallel out of guide profiles.

- Disconnect harness connectors of installed electrical components and hoses.

Installing

To install, perform the steps used for removal in reverse order.

- Make sure gaps are parallel and pay attention to gap dimensions