Diagram 55/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Fuses SB5, SB6, SB7, SB8, SB9, SB10 and SB11





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J519 - Vehicle Electrical System Control Module Overview of Control Modules

N75 - Wastegate Bypass Regulator Valve 2.0L CCTA, CBFA and BPY Overviews

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 Locations

N249 - Turbocharger Recirculating Valve 2.0L CCTA, CBFA and BPY Overviews

N276 - Fuel Pressure Regulator Valve 2.0L CCTA, CBFA and BPY Overviews

SB5 - Fuse 5 (on fuse panel B) Overview of Fuses

SB6 - Fuse 6 (on fuse panel B) Overview of Fuses

SB7 - Fuse 7 (on fuse panel B) Overview of Fuses

SB8 - Fuse 8 (on fuse panel B) Overview of Fuses

SB9 - Fuse 9 (on fuse panel B) Overview of Fuses

SB10 - Fuse 10 (on fuse panel B) Overview of Fuses

SB11 - Fuse 11 (on fuse panel B) Overview of Fuses

T2dt - Double Connector

T2dv - Double Connector

T2eb - Double Connector

T2ed - Double Connector

T6l - 6-Pin Connector

T6w - 6-Pin Connector, in engine compartment, rear

T14b - 14-Pin Connector, near battery Overview of Connector Stations and Connectors

T26 - 26-Pin Connector, on electronics box

T40 - 40-Pin Connector, on electronics box

Z19 - Oxygen Sensor (O2S) Heater

(D183) - Connection 4 (87a) (in engine compartment wiring harness)

(D189) - Connection (87a) (in engine pre-wiring wiring harness)

(D202) - Connection 6 (87a) (in engine compartment wiring harness)

Previous Diagram 55/3 (Tracks 15-28)

Next Diagram 55/5 (Tracks 43-56)