FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Engine Mount: Service and Repair






Engine and Transmission Mount Overview






1 Bolt

Transmission mount bracket to transmission.

Tightening specifications, refer to one of the following:

GTI, Eos, Passat and CC with a Direct Shift Gearbox.

GTI, Eos, Passat and CC with a manual transmission.

Passat and CC with a automatic transmission.

2 Bolt

Pendulum support to transmission.

Strength category 8.8 = 40 Nm + 90° (1/4 turn) additional turn.

Strength category 10.9 = 50 Nm + 90° (1/4 turn) additional turn. 1)

Always replace.

With a manual transmission, only use bolts with a strength category of 10.9 if thread inserts such as a Heli-Coil are installed. Identification, refer to => [ Section on the First Thread, with Thread Insert Installed (for example: Heli-Coil) ].

3 Engine Mount Bracket

4 Bolt

40 Nm + 180° (1/2) additional turn.

Always replace.

Engine mount bracket to engine.

5 Engine Mount

6 Bolt

40 Nm + 90° (1/4) additional turn.

Always replace.

Engine mount to body.

7 Support

8 Bolt

20 Nm + 90° (1/4) additional turn.

Always replace.

Support to engine mount.

9 Bolt

20 Nm + 90° (1/4) additional turn.

Always replace.

Support to body.

10 Bolt

40 Nm + 90° (1/4) additional turn.

Always replace.

Engine mount to body.

11 Bolt

60 Nm + 90° (1/4) additional turn.

Always replace.

Engine mount to engine mount bracket.

12 Pendulum Support

13 Bolt

100 Nm + 90° (1/4) additional turn.

Always replace.

Pendulum support to subframe.

First, install the pendulum support to transmission bolt, then install the pendulum support to subframe bolt.

14 Bolt

60 Nm + 90° (1/4) additional turn.

Always replace.

Transmission mount to transmission mount bracket.

15 Bolt

40 Nm + 90° (1/4) additional turn.

Always replace.

Transmission mount to body

16 Transmission Mount

The illustration shows the Direct Shift Gearbox (DSG) version.

17 Bolt

Transmission mount bracket to transmission.

Tightening specifications, refer to one of the following:

GTI, Eos, Passat and CC with a Direct Shift Gearbox.

GTI, Eos, Passat and CC with a manual transmission.

Passat and CC with a automatic transmission.

18 Transmission Mount Bracket

Section on the First Thread, with Thread Insert Installed (for example: Heli-Coil)