Brake Pedal Overview

Brake Pedal Overview


The path of the brake pedal must not be shortened via extra floor mats.

Before installing, lubricate all mounting points with grease, part no. G 000 602.






1 Mounting Bracket

2 Self-Locking Hex Nut

• 25 Nm

3 Brake Lamp Switch (F)

• Includes brake pedal switch (F47)

• On vehicles from CW 45/05, brake lamp switch (F) is located on brake master cylinder, refer to => [ Brake Booster and Master Brake Cylinder Overview ] Brake Booster and Master Brake Cylinder Overview

• Clip brake pedal at pressure rod of brake booster before installing brake light switch => [ Hold ball head of push rod in
front of mounting and push brake pedal in direction of brake booster,
so the ball head engages audibly. ] Brake Pedal and Brake Booster.

• Lubricate tappet head with polycarbamide grease G 052 142 A2.

4 Hex Head bolt

5 Brake Pedal

6 Cover

7 Ball Socket

8 Wheel Hub Support

• For ball head of brake servo push rod

9 Self-Locking Hex Nut

• 25 Nm

10 Bushing

11 Pivot Pin