Amplifier: Service and Repair

Amplifier (R12)

View of removed amplifier:

The amplifier is installed under the left front seat.






Removal

Do the following before starting the procedure:

- Turn off the ignition and all electric consumers and remove the key.

Amplifier is installed under front left seat.

- Move seat into uppermost and rearmost position.

- Unclip cover in - direction of arrow - at bottom of seat.






- Remove screws - arrows - on amplifier.






- Pull out the amplifier just far enough until the connectors are accessible.

- Disengage connectors at amplifier - arrows - and remove them.






- Remove amplifier.

Installation

- Make sure that the amplifier is slid correctly into notch on bracket - arrows - when installing.






Remaining installation in reverse order of removal.