Wire Routing, Connectors and Bracket on Valve Body

Wire Routing, Connectors and Bracket on Valve Body

In this chapter the information regarding working on the solenoid valves is shown in illustrations.

Wiring Routing and Connectors






1 - Solenoid Valve 4 (N91)

• Wiring colors to the valve: green/brown.

2 - Solenoid Valve 6 (N93)

• Wiring colors to the valve: green/gray.

3 - Solenoid Valve 5 (N92)

• Wiring colors to the valve: yellow/purple.

4 - Solenoid Valve 9 (N282)

• Wiring colors to the valve: red/blue

5 - Solenoid Valve 10 (N283)

• Wiring colors to the valve: white/black.

6 - Solenoid Valve 3 (N90)

• Wiring colors to the valve: green/blue.

7 - Solenoid Valve 1 (N88)

• Wiring color to the valve: white.

8 - Solenoid Valve 2 (N89)

• Wiring color to the valve: black.

A - Transmission Output Speed Sensor Connector

• Wiring colors to the sensor: blue/orange.

B - Transmission Input Speed Sensor Connector

• Wiring colors to the sensor: white/red.

Bracket for Connectors, Securing the Wires






1 - Transmission Output Speed Sensor Connector Bracket

• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications.

2 - Transmission Input Speed Sensor Connector Bracket

• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications.

3 - Transmission Fluid Temperature Sensor (G93)

• Wiring color for sensor: orange/orange.

4 - Selector Lever

• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications.

Arrow -

• The wires are attached here.