Line Routing, Connectors and Bracket on Valve Body

Line Routing, Connectors and Bracket on Valve Body

In this chapter the information regarding working on the solenoid valves is shown in illustrations.

Wiring Routing and Connectors






1 - Solenoid Valve 4 (N91)

• Wiring colors to the valve: green/brown.

2 - Solenoid Valve 6 (N93)

• Wiring colors to the valve: green/gray.

3 - Solenoid Valve 5 (N92)

• Wiring colors to the valve: yellow/purple.

4 - Solenoid Valve 9 (N282)

• Wiring colors to the valve: red/blue.

5 - Solenoid Valve 10 (N283)

• Wiring colors to the valve: white/black.

6 - Solenoid Valve 3 (N90)

• Wiring colors to the valve: green/blue.

7 - Solenoid Valve 1 (N88)

• Wiring color to the valve: white.

8 - Solenoid Valve 2 (N89)

• Wiring color to the valve: black.

A - Transmission Output Speed (RPM) Sensor (G195) Connector

• Wiring colors to the sensor: blue/orange.

B - Transmission Input Speed (RPM) Sensor (G182) Connector

• Wiring colors to the sensor: white/red

Bracket for Connectors, Securing the Wires






1 - Bracket for the Transmission Output Speed (RPM) Sensor (G195) Connector

• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications.

2 - Bracket for the Transmission Input Speed (RPM) Sensor (G182) Connector

• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications.

3 - Transmission Fluid Temperature Sensor (G93)

• Wire colors on the sensor: orange/orange.

4 - Selector Lever

• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications.

Arrow -

• The wires are attached here.