Secondary Air Injection Solenoid Valve

Secondary Air Injection Solenoid Valve

Removing

- Disconnect the connector - 1 - and remove the pressure tube - 2 -.





- Remove the bolts from the connecting pipe.

- Remove the bolts for the Secondary Air Injection (AIR) solenoid valve and remove the valve.





Installing

- Replace the seals.

- Only tighten the bolts by hand.

- Tighten the bolts for the AIR solenoid valve and connecting pipe.

- Connect the connector - 1 - and pressure tube - 2 -. Make sure the pressure tube is seated securely.





Tightening Specification