Sunroof / Moonroof Weatherstrip: Adjustments

Panel Seal, Adjusting

- Using a strip of cardboard about 0.3 mm thick (e.g. business card), check if pretension between panel seal - 2 - and body is even all around. Cardboard should slide through gap with firm resistance.





- Sunroof Glass Panel, Removing => [ Sunroof Glass Panel ] Sunroof Glass Panel

- If pretension is insufficient, the panel seal - 2 - can be pressed open using a trim removal wedge (3409) - 1 -.

- If the pretension is excessive, press the panel seal - 1 - closed around circumference using application roller (3356).