Bellows

Bellows

Removing





- Slide sun shade toward rear.

- Tilt open sunroof glass panel.

- Carefully unclip bellows - 1 - from lower section of slotted guide rail - 3 - using a trim removal wedge (3409).

- Pull bellows - 1 - off mounting pins - 4 -.

- Disengage bellows - 1 - at top - rear - 2 -.

- Remove bellows - 1 -.

Installing





- Slide sun shade toward rear.

- Tilt open sunroof glass panel.

- Engage bellows - 1 - first at top - rear - 2 -.

- Clip bellows - 1 - with mounting pins - 4 - into slotted guide rail.

- Engage bellows - 1 - at bottom, rear - 3 - and clip bellows in starting at front in lower section of slotted guide rail.