Center A-Pillar Trim

Pillar and Side Trim

Center A-pillar Trim

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removal

- Remove side instrument panel cover. Refer to=> [ Instrument Panel Side Covers ] Service and Repair.

- Remove the trim panel - 1 - from the mounts in the body - arrow A -.

- Pull trim upward out of lower A-pillar trim - arrow B -.





Installation

- To install, perform the steps used for removal in reverse order.

• Ensure trim is in door seal molding after installation.