Rear Lid Trim

Rear Lid Trim Panel, Rabbit from MY 2004

Rear Lid Trim

Removal

- Remove two screws - 1 - from handle recess (2 Nm).

- Remove trim from mounts in rear lid using disassembly pliers (3392). Start from lower edge of tailgate.

- Remove rear lid trim - 2 - on both sides from window frame trim - 3 -.

- Remove trim in centering pin area - 4 - and - 5 - from mounts in rear lid.





Installation

- To install, perform the steps used for removal in reverse order.

• Before installing, check securing clips for damage and replace if necessary.