Clutch Release Mechanism

Clutch Release Mechanism

Special tools, testers and auxiliary items required

• Torque wrench 5 to 50 Nm (V.A.G 1331)

• MoS2 grease

Remove and Install Clutch Release Lever Along with Release Bearing





- Disengage spring - arrow 1 -.

- Remove clutch release lever - arrow 2 - and release bearing.

- Installation is performed in reverse order of removal.

Release Bearing, Removing and Installing





- Press together retaining tabs - arrows - on rear side of clutch release lever and remove release bearing - A - from clutch release lever.

- To install release bearing - A -, press into clutch release lever until retaining tabs - arrows - engage.