Parking Brake Cable: Service and Repair

Parking Brake Cable

Removing

- Release parking brake.

- Loosen adjustment nut - arrow - enough so that the parking brake cable can be disengaged from compensator bracket.





- Raise vehicle.

- Remove clip - 1 -.





- Press brake lever - 2 - in direction of - arrow - and disengage parking brake cable - 3 -.

- Unclip parking brake cable from bracket at rear axle body - arrow A - and disengage from brackets - arrows -.





- Remove parking brake cable from guide tube - 1 - in direction of - arrow -.





Installing

- Insert parking brake in guide tube.

- Press brake lever - 2 - in direction of - arrow - and engage parking brake cable - 3 -.





- Install clip - 1 -.

- Clip parking brake cable into bracket on rear axle - arrow A -.





- Clamping ring at parking brake cable must be in center of clip.

- Engage parking brake cable in brackets - arrows -.

- Engage parking brake cable into compensator bracket.

- Pre-tighten parking brake cable using adjustment nut - arrow -.





- Adjusting parking brake=> [ Parking Brake, Adjusting ] Adjustments.