Diagram 604/40 (Tracks 533-546)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power and signal splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G374 - Lumbar Support Height Adjustment Sensor

G375 - Lumbar Support Fore/Aft Adjustment Sensor

G440 - Backrest Adjustment Position Sensor

J136 - Memory Seat/Steering Column Adjustment Control Module

J519 - Vehicle Electrical System Control Module Vehicle Electrical System Control Module -J519-

J774 - Front Heated Seats Control Module

T2d - Double Connector

T4l - 4-Pin Connector

T6bc - 6-Pin Connector

T8v - 8-Pin Connector

Z6 - Driver Seat Heating Element

Z7 - Driver Backrest Heating Element

Z31 - Driver Seat Side Bolster Heater

(M43) - Connection 3 (in driver's seat wiring harness)


- Location: In driver's seat wiring harness between wiring circuits for V286 - Backrest Adjustment Motor and V230 - Lumbar Support Fore/Aft Adjustment Motor

(M44) - Connection 4 (in driver's seat wiring harness)


- Location: In driver's seat wiring harness between wiring circuits for N199 - Driver's Side Airbag 1) Igniter and Z6 - Driver's Seat Heating Element


- Location: In driver's seat wiring harness between wiring circuits for E24 - Driver's Safety Belt Switch and T10a - connection Bordnetz 2)

(O13) - Connection 2 (in heated seat wiring harness)


- Location: In heated seats wiring harness inside of Driver's Seat

1) - Through June 2007

2) - From July 2007

Previous Diagram 604/39 (Tracks 519-532)

Next Diagram 604/41 (Tracks 547-560)