Wastegate Actuator: Service and Repair

Turbocharger Vacuum Diaphragm

Removing

- Remove the turbocharger. Refer to => [ Turbocharger ] Turbocharger.

- Loosen the securing plate above the vacuum diaphragm linkage.

- Loosen the lock nut - 2 -.





- Disconnect the linkage from the turbocharger - 3 -.

- Remove the vacuum diaphragm - 1 - bolts - arrows - from the turbocharger.

Installing

Installation is performed in the reverse order of removal, noting the following:

- Adjust the vacuum diaphragm. Refer to => [ Turbocharger Vacuum Diaphragm, Adjusting ] Adjustments.

- Install the turbocharger. Refer to => [ Turbocharger ] Turbocharger.

Tightening Specifications