Ribbed Belt and Accessory Drive Overview

Ribbed Belt and Accessory Drive Overview





1 Accessory Bracket

2 Bolt, 23 Nm

3 Nut, 23 Nm

4 Generator

• Removing and installing, refer to.

• To facilitate installing the generator, slightly push back the threaded bushings for the generator bolts.

5 Bolt, 40 Nm

• Observe the tightening sequence, refer to => [ Accessory Bracket Tightening Sequence ].

6 Bushing

• Quantity: 2.

7 Bolt, 25 Nm

8 Air Conditioning (A/C) Compressor

9 Ribbed Belt

• Before removing, mark the direction of rotation using chalk or a felt tip marker.

• Check for wear.

• Do not kink.

• Removing and installing, refer to => [ Ribbed Belt ] Ribbed Belt.

10 Vibration Damper Pulley

• For the ribbed belt.

• The contact surface to the crankshaft toothed belt gear must be completely free of oil and grease.

11 Bolt

• Always replace.

Strength category 8.8: 10 Nm + 90° (1/4) additional turn.

Strength category 10.9: 20 Nm + 90° (1/4) additional turn.

12 Bolt, 23 Nm

13 Ribbed Belt Tensioner

• To release the tension on ribbed belt, rotate using an open end wrench.

Accessory Bracket Tightening Sequence