Engine Mount: Adjustments

Engine Mount Adjustment, Checking

- Remove the engine cover/upper air filter housing. Refer to => [ Engine Cover/Upper Air Filter Housing ] Engine Cover/Upper Air Filter Housing.

The following dimensions must be reached:

• There must be a distance - a - of at least 10 mm present between the engine mount bracket - 2 - and right longitudinal member.





• The casting edge on the engine mount bracket - 2 - must be parallel to the engine mount arm - 1 -. Dimension - x - must be the same at the front and lower bottom.

• Distance - a - can also be checked using a suitable round stock.