Blower Motor: Service and Repair

Fresh Air Blower (V2)

Removal

The Fresh Air Blower is accessible from footwell on front passenger side.

- Remove the partition from the heater.

Partition






- Remove the plastic screws - 2 - and the partition- 1 -.

- Disconnect harness connector - A - from fresh air blower (V2).






- Remove the bolts - B - (1 Nm) from the fresh air blower.

- Release the retainer - 2 - and turn the fresh air blower in - direction of arrow -.

- Remove the fresh air blower from the heater.

Installation

Install in reverse order of removal.