Air Distribution Door Motor (V428), From 25 May 2008

Air Distribution Door Motor (V428), From 25 May 2008

Removal

- Remove the instrument panel.






- Disconnect the connector from the air distribution door motor (V428).

- Remove the screws - 1 - and then remove the air distribution door motor.

Installation

Install in reverse order of removal.

• After installing the air distribution door motor check the door function.

• Initiate Basic Setting function with Vehicle Diagnosis, Testing and Information System (VAS 5051B) (or succeeding model). Refer to=> [ Checking and Adjusting Components ] Checking and Adjusting Components.