Fan Shroud

Fan Shroud

Removing

- Remove the bolts - 1 - from the top.






• The left bolt is under the coolant connector.

- Remove the noise insulation.

- Loosen the clamps - items 1 and 2 -, remove the charge air hose and seal the charge air cooler with a clean cloth.






- Disconnect the connector - 2 -.






- Remove the bolts - 3 - and remove the fan shroud downward.

Installing

Install in reverse order of removal. Note the following:

• Install the fan shroud from below.

• Tightening specifications, refer to => [ Radiator, Fan Shroud and Fans Overview ] Removal and Replacement.