Diagram 13/13 (Tracks 155-168)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Turbocharger Recirculating Valve, Evaporative Emission (EVAP) Canister Purge Solenoid Valve, Turbocharger Recirculating Valve, Fuel Pressure Regulator Valve, Charge Air Pressure Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G31 - Charge Air Pressure Sensor Locations

J519 - Vehicle Electrical System Control Module Overview of Control Modules

J623 - Engine Control Module (ECM), in plenum chamber, center Overview of Control Modules

N75 - Wastegate Bypass Regulator Valve Locations

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 Locations

N249 - Turbocharger Recirculating Valve Locations

N276 - Fuel Pressure Regulator Valve Locations

T2dt - Double Connector

T2dv - Double Connector

T2eb - Double Connector

T2ed - Double Connector

T4aj - 4-Pin Connector

T14b - 14-Pin Connector, near battery Overview of Connector Stations and Connectors

T60 - 60-Pin Connector

T94 - 94-Pin Connector

(327) - Sensor Ground Connection (in engine compartment wiring harness)

(D189) - Connection (87a) (in engine pre-wiring wiring harness)

Previous Diagram 13/12 (Tracks 141-154)

Next Diagram 13/14 (Tracks 169-182)