Procedures

Engine, Securing to Engine and Transmission Holder (VAS 6095)

Special tools, testers and auxiliary items required

• Engine Sling (2024 A)

• Shop Crane (VAS 6100)

• Engine and Transmission Holder (VAS 6095)

Secure the engine to the engine and transmission holder (VAS 6095) when working on it.

- Separate the transmission.

- Install the engine sling (2024 A) as follows and lift out the engine from the engine/transmission jack (V.A.G 1383 A) using the shop crane (VAS 6100).






Belt pulley side: 2nd hole of rail in position 1.

Flywheel side: 1st hole of rail in position 7.


Use securing pins at hook and drifts in order to prevent damage on engine and on vehicle.

• The peg positions on the engine sling marked 1 to 4 face the belt pulley.

• The bores in the hole rail are counted from the hook.

- Secure the engine to the engine and transmission holder (VAS 6095).