Radiator Cooling Fan: Service and Repair

Coolant Fan and Coolant Fan 2

Removing

- Remove the upper fan shroud bolts - upper arrows -. Loosen the refrigerant pipes and move them to the side if necessary.






- Remove the noise insulation.

- Disconnect the harness connector - 1 - and remove the lower fan shroud bolts - lower arrows -.






- Remove the fan shroud downward.

- Disconnect the electrical harness connector - 1 - and lay the wire to the side.






- Remove the nuts - arrows - and remove the coolant fans.

Installing

Install in reverse the order of removal. Note the following:

For the correct tightening specifications, refer to => [ Cooling System Components Overview, Body Side ] Cooling System Components Overview, Body Side.