Test Table (Test Steps 1 - 16)

Test table (test steps 1 - 16)
Notes on test table
^ The socket designations of adapter VAG 1598/36 are identical to the ABS control module (w/EDL) -J104- contact designations in wiring diagram.
^ If the readings obtained deviate from the specifications, carry out malfunction repair measure in the right-hand part of the table.
^ Continuity checks with adapter set VAG 1594 A (bridging).
^ If the measured figures only deviate slightly from the specifications, clean sockets and plugs of the testers and adapter cables (with contact spray G 000 700 04) and repeat check. Before replacing components, check wiring and connections and also, particularly for specifications of less than 10°, repeat resistance check on the component.

Test step 1-3:

Test step 4:

Test step 5:

Test step 6:

Test step 7:

Test step 8:

Test steps 9-10:

Test steps 11-12:

Test step 13:

Test step 14:

Test step 15:

Test step 16: