New Additional Key, Adapting

New Additional Key, Adapting

- Insert a mechanically correct (old) ignition key in the ignition lock.
- Switch on ignition.
- Using a new (not taught / not learned) key, mechanically lock the vehicle (e.g. drivers door) and then operate one of the remote control buttons on key.
- After a pause of more than one second, operate one of the remote control buttons on key a second time.
- The adaptation sequence is complete and will be confirmed by the vehicle by a feedback horn beep.

The various functions listed in the table can be called up by selecting channel numbers 03...10 and adapted.

Central locking system functional variations







The adaptation shown here is only an example.

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -1- and -0- (10 selects the "Adaptation" function).

Indicated on display:

Rapid data transfer Q
10 - Adaptation

- Confirm entry with -Q- button.

Indicated on display:

Adaptation
Enter channel number XX

- Press buttons -0- and -6- (channel number 06 switches the horn on or off when locking).

Indicated on display:

Adaptation Q
Enter channel number 06

- Confirm entry with -Q- button.

Indicated on display:

Channel 6 Adaptation 0 ->
Unlock Beep 0 <-1 3->

- Press -> button.

Indicated on display:

Channel 6.....Adaptation 0 ->
Enter adaptation value XXXXX

- Press -> button.
- Press the -0- button four times and then the -1- button (e.g. 00001).

Indicated on display:

Channel 6.....Adaptation 0 Q
Enter adaptation value 00001.

- Confirm entry with -Q- button.

Indicated on display:

Channel 6 Adaptation 1 ->
Unlock Beep 1 <-1 3->

- Confirm entry with -Q- button.

Indicated on display:

Channel 6 Adaptation 1 Q
Save amended value?

- Confirm entry with -Q- button.

Indicated on display:

Channel 6 Adaptation 1 ->
Amended value is saved

- Press -> button.

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -6- to end the output.

Indicated on display:

Rapid data transfer Q
06 End output

- Confirm entry with -Q- button.

Indicated on display:

Rapid data transfer HELP
Enter address word XX

- Switch off ignition.
- Disconnect connection to scan tool V.A.G 1551.