Condenser HVAC: Service and Repair

Condensor, Removing
- Discharge refrigerant system.
- Bring front end assembly (lock carrier) into service position.
- Vehicles from 10.00 Remove front bumper carrier
- Loosen and separate refrigerant pipes/couplings from evaporator.


CAUTION!
Immediately plug open connections on A/C components and lines to prevent dirt and moisture contamination.







1 - Lock carrier
2 - Clip
- Vehicles from 10.00
3 - Bracket
- Vehicles from 10.00
4 - Grommet, upper
5 - Condensor
6 - Left air guide
7 - Right air guide
8 - Bolt
- Vehicles up to 10.00
- 8 Nm (71 in lb)
- Qty.; 4
9 - Rubber grommet, lower