Ignition Coil: Testing and Inspection

CHECKING IGNITION COIL

- Disconnect harness connector and ignition wire from Ignition Coil (N152).



- Check primary resistance between terminals -1- and -15- using Fluke 83 multimeter.

^ Specified value: 0.5 - 0.7 Ohms.

- Check secondary resistance between terminals -4- and -15-.

^ Specified value: 3000 to 4000 Ohms.

- If NOT OK:

- Remove Ignition Coil and disconnect Ignition Coil Power Output Stage (N157).
- Repeat test.