Removal
STEERING COLUMN: STEERING WHEEL: REMOVAL; 2013 MY Corolla [07/2012 -]
1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
2. REMOVE STEERING PAD
Removal
3. REMOVE STEERING WHEEL ASSEMBLY
(a) for Type A:
(1) Remove the steering wheel assembly set nut.
Text in Illustration
(2) Put matchmarks on the steering wheel assembly and steering main shaft.
(3) Disconnect the connectors from the spiral cable sub-assembly.
(4) Using SST, remove the steering wheel assembly.
Text in Illustration
SST : 09950-50013
09951-05010
09952-05010
09953-05020
09954-05070
NOTICE:
Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.
(b) for Type B:
(1) Remove the steering wheel assembly set nut.
Text in Illustration
(2) Put matchmarks on the steering wheel assembly and steering main shaft.
(3) Disconnect the connectors from the spiral cable sub-assembly.
(4) Using SST, remove the steering wheel assembly.
Text in Illustration
SST : 09950-50013
09951-05010
09952-05010
09953-05020
09954-05070
NOTICE:
Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.
4. REMOVE NO. 1 STEERING WHEEL ORNAMENT (w/o Steering Pad Switch RH)
(a) for Type A:
(1) Remove the screw.
(2) Disengage the 2 pins to remove the No. 1 steering wheel ornament from the steering wheel sub-assembly.
(b) for Type B:
(1) Remove the screw.
(2) Disengage the 2 pins and claw, and remove the No. 1 steering wheel ornament from the steering wheel sub-assembly.
5. REMOVE STEERING PAD SWITCH LH (w/o Steering Pad Switch RH) Removal
6. REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch RH) Removal
7. REMOVE CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System) Removal
8. REMOVE CRUISE CONTROL SWITCH WIRE (w/ Cruise Control System)
9. REMOVE LOWER STEERING WHEEL BOSS COVER
(a) for Type A:
(1) Remove the 2 screws.
(2) Disengage the 2 claws to remove the lower steering wheel boss cover from the steering wheel sub-assembly.
(3) Remove the 2 steering wheel pad attaching screws from the lower steering wheel boss cover.
(b) for Type B:
(1) Disengage the 2 pins.
(2) Disengage the 2 claws to remove the lower steering wheel boss cover from the steering wheel sub-assembly.