Removal

AUDIO / VIDEO: RADIO RECEIVER: REMOVAL; 2013 MY Corolla [07/2012 -]

1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH Removal

2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH Removal

3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

5. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Removal

6. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/ USB Audio System) Removal

7. REMOVE RADIO RECEIVER WITH BRACKET (for Radio Receiver Type without USB Audio System)

(a) Remove the 4 bolts.





(b) Pull the radio receiver with bracket toward the rear of the vehicle and disengage the 4 clips.





(c) Disconnect each connector and remove the radio receiver with bracket.

8. REMOVE RADIO RECEIVER WITH BRACKET (for Radio Receiver Type with USB Audio System)

(a) Remove the 4 bolts.





(b) Disconnect each connector and remove the radio receiver with bracket.

9. REMOVE RADIO AND DISPLAY RECEIVER WITH BRACKET (for Radio and Display Type)

(a) Remove the 4 bolts.





(b) Disconnect each connector and remove the radio and display receiver with bracket.

10. REMOVE NAVIGATION RECEIVER WITH BRACKET (for Navigation Receiver Type)

(a) Remove the 4 bolts.





(b) Pull the navigation receiver with bracket toward the rear of the vehicle and disengage the 4 clips.





(c) Disconnect each connector and remove the navigation receiver with bracket.

11. REMOVE NO. 2 RADIO BRACKET (for Radio Receiver Type without USB Audio System)

(a) Remove the 4 screws and No. 2 radio bracket.





Text in Illustration





12. REMOVE NO. 1 RADIO BRACKET (for Radio Receiver Type without USB Audio System)

(a) Remove the 4 screws and No. 1 radio bracket.





Text in Illustration





13. REMOVE RADIO RECEIVER ASSEMBLY (for Radio Receiver Type without USB Audio System)

14. REMOVE NO. 2 RADIO BRACKET (for Radio Receiver Type with USB Audio System)

(a) Remove the 3 screws and No. 2 radio bracket.





Text in Illustration





15. REMOVE NO. 1 RADIO BRACKET (for Radio Receiver Type with USB Audio System)

(a) Remove the 3 screws and No. 1 radio bracket.





Text in Illustration





16. REMOVE RADIO RECEIVER ASSEMBLY (for Radio Receiver Type with USB Audio System)

17. REMOVE NO. 2 RADIO BRACKET (for Radio and Display Type)

(a) w/o Navigation System:

(1) Remove the 3 screws and No. 2 radio bracket.





Text in Illustration





(b) w/ Navigation System:

(1) Remove the 5 screws and No. 2 radio bracket.





18. REMOVE NO. 1 RADIO BRACKET (for Radio and Display Type)

(a) w/o Navigation System:

(1) Remove the 3 screws and No. 1 radio bracket.





Text in Illustration





(b) w/ Navigation System:

(1) Remove the 5 screws and No. 1 radio bracket.





19. REMOVE EXTENSION MODULE (for Radio and Display Type) Removal

20. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)

21. REMOVE NO. 2 RADIO BRACKET (for Navigation Receiver Type)

(a) Remove the 4 screws and No. 2 radio bracket.





22. REMOVE NO. 1 RADIO BRACKET (for Navigation Receiver Type)

(a) Remove the 4 screws and No. 1 radio bracket.





23. REMOVE NAVIGATION RECEIVER ASSEMBLY (for Navigation Receiver Type)