Reassembly (from 07/2011)

BRAKE SYSTEM (OTHER): BRAKE MASTER CYLINDER (for Hatchback): REASSEMBLY

1. INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER

2. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

3. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

(a) Apply lithium soap base glycol grease to 2 new grommets.

(b) Install the 2 grommets onto the brake master cylinder reservoir sub-assembly.

(c) Install the brake master cylinder reservoir sub-assembly to the master cylinder body.

(d) Fix the brake master cylinder in a vise between aluminum plates.





NOTICE:
Do not overtighten the vise.

(e) Using a pin punch 5 mm and a hammer, tap in the straight pin.