Disassembly (from 07/2011)

BRAKE (REAR): REAR BRAKE (for Hatchback Drum Type): DISASSEMBLY

1. REMOVE REAR BRAKE SHOE KIT

(a) Using SST, separate the shoe return spring from the front brake shoe.





SST : 09921-00011

NOTICE:
Do not damage the wheel cylinder boot.

(b) Using SST, remove the shoe hold down spring cup, shoe hold down spring, pin and front brake shoe.





SST : 09718-00011

(c) Remove the tension spring.

(d) Remove the shoe return spring from the rear brake shoe and remove the parking brake shoe strut set.





(e) Using SST, remove the shoe hold down spring cup, shoe hold down spring, pin and rear brake shoe.





SST : 09718-00011

(f) Using needle-nose pliers, separate the parking brake cable.





2. REMOVE REAR BRAKE AUTOMATIC ADJUST LEVER

(a) Remove the automatic adjust lever tension spring and the automatic adjust lever.





3. REMOVE REAR BRAKE PARKING BRAKE SHOE LEVER SUB-ASSEMBLY

(a) Using a screwdriver, remove the C-washer and parking brake shoe lever.





4. REMOVE REAR DRUM BRAKE BLEEDER PLUG CAP

5. REMOVE REAR DRUM BRAKE BLEEDER PLUG

6. REMOVE REAR WHEEL BRAKE CYLINDER ASSEMBLY

(a) Using a union nut wrench 10 mm, separate the brake tube from the rear wheel brake cylinder.





HINT
Use a container to catch the brake fluid.

(b) Remove the bolt and rear wheel brake cylinder.

7. REMOVE REAR WHEEL CYLINDER KIT

(a) Remove the 2 wheel cylinder boots from the wheel brake cylinder.





Text in Illustration





(b) Remove the 2 pistons.

(c) Remove the wheel cylinder cup from each piston.

(d) Remove the compression spring.