ABS Warning Light does not Come ON (from 07/2011)

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ANTI-LOCK BRAKE SYSTEM (for Hatchback): ABS Warning Light does not Come ON
- ABS Warning Light does not Come ON

DESCRIPTION

The skid control ECU (brake actuator assembly) is connected to the combination meter via CAN communication.

WIRING DIAGRAM

Refer to ABS Warning Light Remains ON ABS Warning Light Remains ON (from 07/2011).

INSPECTION PROCEDURE

NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE

1. CHECK CAN COMMUNICATION SYSTEM ABS Warning Light Remains ON (from 07/2011)

B -- CHECK CAN COMMUNICATION SYSTEM How To Proceed With Troubleshooting (from 07/2011)
A -- Continue to next step.

2. CHECK ABS WARNING LIGHT

(a) Disconnect the skid control ECU connector.

(b) Turn the ignition switch to ON.

(c) Check that the ABS warning light comes on.

Result





(d) Reconnect the skid control ECU connector.

B -- REPLACE BRAKE ACTUATOR ASSEMBLY Removal (from 07/2011)
A -- Continue to next step.

3. READ VALUE USING TECHSTREAM (ABS WARNING LIGHT) ABS Warning Light Remains ON (from 07/2011)

B -- REPLACE BRAKE ACTUATOR ASSEMBLY Removal (from 07/2011)

A -- REPLACE COMBINATION METER ASSEMBLY Removal (from 07/2011)