Front Drive Shaft Assembly (for TMC Made)

DRIVE SHAFT: FRONT DRIVE SHAFT ASSEMBLY (for TMC Made): INSPECTION

1. INSPECT FRONT DRIVE SHAFT ASSEMBLY

(a) Check that there is no excessive play in the outboard joint.





(b) Check that the inboard joint slides smoothly in the thrust direction.

(c) Check that there is no excessive play in the radial directions of the inboard joint.

(d) Check the boots for damage.

(e) Check whether the drive shaft dimensions are within the following specifications.





HINT
The following table shows dimension (A) of the drive shaft.

Dimension (A):