Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER (w/ Antenna): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type) Removal

3. REMOVE REAR SEAT HEADREST ASSEMBLY (for Fixed Seat Type)

4. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY (for Fixed Seat Type)

5. REMOVE REAR SEATBACK ASSEMBLY (for Fixed Seat Type) Removal

6. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type) Removal

7. REMOVE REAR SIDE SEATBACK ASSEMBLY LH (for Fold Down Seat Type) Removal

8. REMOVE REAR SEAT HEADREST ASSEMBLY (for Reclining Seat Type)

9. REMOVE REAR SEAT CUSHION ASSEMBLY (for Reclining Seat Type) Removal

10. REMOVE REAR SEATBACK COVER (for Reclining Seat Type) Removal

11. REMOVE SEPARATE TYPE REAR SEATBACK ASSEMBLY LH (for Reclining Seat Type) Removal

12. REMOVE INNER ROOF SIDE GARNISH LH Removal

13. REMOVE TIRE PRESSURE WARNING RECEIVER ASSEMBLY

(a) Remove the bolt.

(b) Disconnect the connector and remove the tire pressure warning receiver assembly.