Removal

SUSPENSION: REAR STRUT ROD: REMOVAL

1. REMOVE REAR WHEEL

2. REMOVE NO. 2 FLOOR UNDER COVER (w/ Cover) Removal

3. REMOVE NO. 1 FLOOR UNDER COVER (w/ Cover) Removal

4. SEPARATE PARKING BRAKE NO. 3 CABLE ASSEMBLY

(a) Remove the bolt, and separate the parking brake No. 3 cable assembly.





5. REMOVE REAR STRUT ROD

(a) Support the rear axle carrier with a jack.





(b) Remove the bolt and nut, and disconnect the strut rod (front side).





NOTICE:
When removing the bolt, keep the nut from rotating.

(c) Remove the bolt, nut and strut rod from the rear axle carrier.





NOTICE:
When removing the bolt, keep the nut from rotating.