Removal

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: REMOVAL

1. REMOVE REAR BUMPER ASSEMBLY (w/o Rear Lower Spoiler) Removal

2. REMOVE REAR FLOOR BOARD (w/ Rear Lower Spoiler) Removal

3. REMOVE REAR BUMPER ASSEMBLY (w/ Rear Lower Spoiler) Removal

4. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

5. REMOVE SPARE WHEEL COVER CLAMP

6. REMOVE SPARE WHEEL COVER ASSEMBLY

7. REMOVE LUGGAGE COMPARTMENT SIDE TRAY ASSEMBLY Removal

8. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for TMC Made) Removal

9. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (except TMC Made) Removal

10. REMOVE REAR FLOOR FINISH PLATE Removal

11. REMOVE REAR COMBINATION LIGHT ASSEMBLY

(a) Disconnect the connector.





(b) Disengage the clamp.

(c) Remove the 3 nuts.





(d) Disengage the guide and remove the rear combination light assembly as shown in the illustration.

12. REMOVE LUGGAGE COMPARTMENT DOOR COVER

13. REMOVE REAR LIGHT ASSEMBLY

(a) Disconnect the connector.





(b) Disengage the clamp.

(c) Remove the 3 nuts.





(d) Disengage the pin and remove the rear light assembly.

HINT
Be careful not to break the engaging portion of the pin when removing the rear light assembly.