Installation

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION

1. INSTALL REAR LIGHT ASSEMBLY

(a) Engage the pin and install the rear light assembly.





(b) Install the 3 nuts.

Torque : 3.6 Nm (37 kgf-cm, 32 in-lbf)

(c) Engage the clamp.





(d) Connect the connector.

2. INSTALL LUGGAGE COMPARTMENT DOOR COVER

3. INSTALL REAR COMBINATION LIGHT ASSEMBLY

(a) Engage the guide and install the rear combination light assembly as shown in the illustration.





(b) Install the 3 nuts.

Torque : 3.6 Nm (37 kgf-cm, 32 in-lbf)

(c) Engage the clamp.





(d) Connect the connector.

4. INSTALL REAR FLOOR FINISH PLATE Installation

5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for TMC Made) Installation

6. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (except TMC Made) Installation

7. INSTALL LUGGAGE COMPARTMENT SIDE TRAY ASSEMBLY Installation

8. INSTALL SPARE WHEEL COVER ASSEMBLY

9. INSTALL SPARE WHEEL COVER CLAMP

10. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

11. INSTALL REAR BUMPER ASSEMBLY (w/o Rear Lower Spoiler) Installation

12. INSTALL REAR BUMPER ASSEMBLY (w/ Rear Lower Spoiler) Installation

13. INSTALL REAR FLOOR BOARD (w/ Rear Lower Spoiler) Installation