Removal

2AR-FE COOLING: THERMOSTAT: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE FRONT WHEEL RH

3. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

4. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

5. REMOVE ENGINE UNDER COVER RH

6. REMOVE ENGINE UNDER COVER LH

7. REMOVE FRONT FENDER APRON SEAL RH

8. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

9. DRAIN ENGINE COOLANT Testing and Inspection

10. REMOVE V-RIBBED BELT (for Vane Pump) Removal

11. REMOVE V-RIBBED BELT (for Compressor and Generator) Removal

12. REMOVE GENERATOR ASSEMBLY Removal

13. DISCONNECT OUTLET RADIATOR HOSE Removal

14. REMOVE WATER INLET

(a) Remove the 2 nuts and water inlet.





15. REMOVE THERMOSTAT

(a) Remove the thermostat.

(b) Remove the gasket from the thermostat.