Removal

PARKING BRAKE: PARKING BRAKE PEDAL: REMOVAL

1. PRECAUTION

Service Precautions

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working (for TMC Made: Airbag System (for TMC Made), except TMC Made: Airbag System (except TMC Made)).

3. REMOVE FRONT DOOR SCUFF PLATE LH Removal

4. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal

5. REMOVE FRONT DOOR SCUFF PLATE RH Removal

6. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal

7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH (for TMC Made) Installation

8. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH (for TMMK Made) Removal

9. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY Removal

10. REMOVE INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY Removal

11. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMC Made) Removal

12. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMMK Made) Removal

13. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

14. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

15. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

16. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY Removal

17. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY Removal

18. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for TMC Made) Removal

19. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for TMMK Made) Removal

20. REMOVE CONSOLE BOX POCKET Removal

21. REMOVE CONSOLE BOX CARPET Removal

22. REMOVE CONSOLE BOX ASSEMBLY (for TMC Made) Removal

23. REMOVE CONSOLE BOX ASSEMBLY (for TMMK Made) Removal

24. REMOVE NO. 2 CONSOLE BOX INSERT FRONT (for TMC Made) Removal

25. REMOVE NO. 2 CONSOLE BOX INSERT FRONT (for TMMK Made) Removal

26. REMOVE NO. 1 CONSOLE BOX INSERT FRONT (for TMC Made) Removal

27. REMOVE NO. 1 CONSOLE BOX INSERT FRONT (for TMMK Made) Removal

28. REMOVE NO. 1 CONSOLE BOX DUCT (for Automatic Air Conditioning System) Removal

29. REMOVE FLOOR CARPET BRACKET LH Removal

30. REMOVE FLOOR CARPET BRACKET RH Removal

31. REMOVE YAW RATE AND ACCELERATION SENSOR (w/ VSC) Removal

32. REMOVE FLOOR SHIFT LEVER ASSEMBLY

(a) Remove the 4 bolts and the floor shift lever assembly.

33. REMOVE CENTER AIRBAG SENSOR ASSEMBLY Removal

34. DISCONNECT NO. 4 PARKING BRAKE CABLE ASSEMBLY

(a) Using a wrench, hold the lock nut and loosen the turnbuckle.

(b) Disconnect the No. 4 parking brake cable assembly from the No. 1 parking brake cable assembly.

35. REMOVE PARKING BRAKE PEDAL ASSEMBLY

(a) Using needle-nose pliers, remove the clip from the No. 1 parking brake cable assembly.

(b) Remove the bolt, nut, and the No. 1 parking brake cable clamp.

(e) Remove the bolt, 2 nuts, and the parking brake pedal assembly with the No. 1 parking brake cable assembly from the body.