Removal

BRAKE: REAR BRAKE: REMOVAL

HINT
* Use the same procedure for the LH side and RH side.
* The procedure listed below are for the LH side.

1. REMOVE REAR WHEEL

2. DRAIN BRAKE FLUID

NOTICE:
If brake fluid leaks onto any painted surface, wash or remove it completely.

3. DISCONNECT REAR BRAKE FLEXIBLE HOSE

(a) Remove the union bolt and the gasket from the rear disc brake cylinder assembly, then disconnect the flexible hose.





4. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY

(a) Hold the 2 rear disc brake cylinder slide pins and remove the 2 bolts and rear disc brake cylinder assembly.